Waarom dit product

Crystal-clear polyester film with permanent adhesive
Scratch-resistant, even on the unprinted areas
Does not tear easily: removable in one piece
Full colour with white ink, or white only
For flat and slightly curved surfaces
Flame-retardant and PVC-free
Print width up to 148 cm in one piece

Have crystal-clear window film made in Nijmegen

With Lintec your print seems to be directly on the glass. It is a transparent polyester printable film with a permanent adhesive layer, widely used in offices and architecture. The film itself is glossy; the printed areas are matt. Configure it below and collect it at the Betouwstraat, or have it sent.

Playing with white ink

With Lintec you choose full colour with white ink, or white only. The less white, the more transparent your print. The higher the ink density, the stronger the colours.

Scratch-resistant and strong

No scratches appear even on the clear, unprinted parts. The film does not tear easily, so you remove it again in one piece. It fits flat and slightly curved surfaces, such as car windows, and is flame-retardant, so it is permitted in public spaces.

How to stick it

Make sure the surface is clean and free of grease. If the adhesive layer can be applied wet, wet the glass and the adhesive with application fluid, position the film and squeegee the moisture out slowly and evenly. If you apply it dry, start at the top and work steadily downwards. Place the protective sheet between the film and the squeegee to protect your print.

Lintec

Lintec is a crystal-clear, transparent polyester print film with a permanent adhesive layer.

Vanaf 1 stuk
Kleinste maat 10 × 5 cm
Eigen drukkerij
In hartje Nijmegen
Advies via WhatsApp
Stuur ons een appje

Opties laden…

Specificaties per materiaal1 materiaal

Lintec

Maximum print width (cm): 148
Colour: Transparent
Brand: None
Thickness (µm): 50
Application: Window
Indoor / Outdoor: Indoor
Privacy effect: Yes
Inside of window: Yes
Surface shape: Flat
Substrate material: Glass, Acrylic glass
Coverage on coloured substrate: None
Film adhesion: Adhesive layer
Adhesive layer type: Permanent
Adhesive layer colour: Transparent

Veelgestelde vragen3 vragen

?How long does Lintec last?

Indoors, count on about 7 years. The material is not suitable for outdoor use.

?My film is being split into panels. How much overlap is included?

About 1.5 cm. In the uploader you indicate how many parts you want your file in; we include the overlap.

?How is Lintec printed?

With odourless water-based latex ink, which soaks into the material and is therefore very scratch-resistant. White ink is printed with UV ink, which cures under a UV lamp.

Waarom dit product

Crystal-clear polyester film with permanent adhesive
Scratch-resistant, even on the unprinted areas
Does not tear easily: removable in one piece
Full colour with white ink, or white only
For flat and slightly curved surfaces
Flame-retardant and PVC-free
Print width up to 148 cm in one piece

Have crystal-clear window film made in Nijmegen

Playing with white ink

With Lintec you choose full colour with white ink, or white only. The less white, the more transparent your print. The higher the ink density, the stronger the colours.