Vergelijkbare producten
Bekijk ook deze producten die mogelijk interessant voor u zijn.
With Airtex® you put an entire wall in your own design, seamless and up to 494 cm wide. It is wall covering for smooth walls, and at trade fairs you can dress a stand with it in no time. Configure your wallpaper below and collect it from us in Nijmegen, or have it sent.
The wallpaper is polyester with a PVC coating. This top layer is matt, lightly textured and water-repellent, resists creasing and tearing and protects against damage and stains. The material weighs 350 grams per m² and is flame-retardant, so you may also use it in public spaces.
The back is light grey, a so-called greyback. If you stick Airtex® on a coloured wall, that colour will not show through your print.
Apply Airtex® with wallpaper paste on a smooth, even wall; it will then adhere well. If you want to remove it later, you simply strip it off and can reuse the print. Order 5 cm extra all round, so you have a margin if a wall or ceiling is not perfectly straight. Clean it with warm water and a microfibre cloth, without detergent: that can damage the ink.
Airtex® is a seamless wallpaper with a maximum print width of 4.94 by 20 metres.
Airtex® is printed with UV ink and has a smell at first. How quickly that goes away depends on how well you ventilate; the smell can linger for 3 months.
That depends on the wall. On a highly absorbent surface, such as plaster or concrete, you use Medium adhesive, possibly after a primer. On a non-absorbent surface, such as a board or door, you use High adhesive.
Yes, as long as it does not get wet; that way you prevent mould. If a room is always warm and humid, we recommend a textile frame.
With Airtex® you put an entire wall in your own design, seamless and up to 494 cm wide. It is wall covering for smooth walls, and at trade fairs you can dress a stand with it in no time. Configure your wallpaper below and collect it from us in Nijmegen, or have it sent.
The wallpaper is polyester with a PVC coating. This top layer is matt, lightly textured and water-repellent, resists creasing and tearing and protects against damage and stains. The material weighs 350 grams per m² and is flame-retardant, so you may also use it in public spaces.
The back is light grey, a so-called greyback. If you stick Airtex® on a coloured wall, that colour will not show through your print.
Apply Airtex® with wallpaper paste on a smooth, even wall; it will then adhere well. If you want to remove it later, you simply strip it off and can reuse the print. Order 5 cm extra all round, so you have a margin if a wall or ceiling is not perfectly straight. Clean it with warm water and a microfibre cloth, without detergent: that can damage the ink.
Bekijk ook deze producten die mogelijk interessant voor u zijn.
