Vergelijkbare producten
Bekijk ook deze producten die mogelijk interessant voor u zijn.
A sticker on the floor stands out where people are already looking: a route to your stand, an arrow to the counter, your logo at the entrance. The hard-wearing printed film is for flat surfaces and can be made in any shape, up to 148 x 750 cm. If it is larger than one width, you split it into pieces in the uploader; where the pieces overlap they get an extra 1.5 cm. You can collect it from us on Betouwstraat, or we can post it to you.
Every floor sticker has an anti-slip layer. In the configurator you see the slip resistance as an R value. R9 suits shops, restaurants, hospitals and classrooms. You choose R10 for public toilets and showers, small restaurant kitchens and garages.
Indoors, a floor sticker goes on flat, smooth floors and tiles. The DOT floor sticker adheres to parquet, laminate, linoleum, vinyl and even low-pile carpet. If you are unsure about adhesion, choose Roughmark with floor laminate: it grips more firmly from the start than the other films. Outdoors you use the asphalt sticker, on an aluminium base, for bricks, paving stones, asphalt and concrete.
Apply at a temperature between 10 and 32 °C, on a dry, clean and grease-free floor. Outdoors, place the edges on the tiles as much as possible and not on the joints. If the adhesive layer may be applied wet, wet the floor and the adhesive, lay the sticker down and squeegee the moisture out from underneath slowly and evenly. If you apply it dry, fix it in place at the top first and work evenly downwards: repositioning it afterwards is difficult.
Anti-slip laminated sticker for the floor — indoors or outdoors.
Allow for at least three months. Outdoors it helps if the edges lie on the tiles and not in the joints.
Indoors, choose a film for flat, smooth floors and tiles; if you're unsure about adhesion, Roughmark with floor laminate. Outdoors, on brick, asphalt or concrete, use the asphalt sticker.
Work on a clean, grease-free floor. If the sticker can be applied wet, slowly squeegee the moisture out from underneath; when applying dry, work from top to bottom, getting it right in one go.
A sticker on the floor stands out where people are already looking: a route to your stand, an arrow to the counter, your logo at the entrance. The hard-wearing printed film is for flat surfaces and can be made in any shape, up to 148 x 750 cm. If it is larger than one width, you split it into pieces in the uploader; where the pieces overlap they get an extra 1.5 cm. You can collect it from us on Betouwstraat, or we can post it to you.
Every floor sticker has an anti-slip layer. In the configurator you see the slip resistance as an R value. R9 suits shops, restaurants, hospitals and classrooms. You choose R10 for public toilets and showers, small restaurant kitchens and garages.
Indoors, a floor sticker goes on flat, smooth floors and tiles. The DOT floor sticker adheres to parquet, laminate, linoleum, vinyl and even low-pile carpet. If you are unsure about adhesion, choose Roughmark with floor laminate: it grips more firmly from the start than the other films. Outdoors you use the asphalt sticker, on an aluminium base, for bricks, paving stones, asphalt and concrete.
Apply at a temperature between 10 and 32 °C, on a dry, clean and grease-free floor. Outdoors, place the edges on the tiles as much as possible and not on the joints. If the adhesive layer may be applied wet, wet the floor and the adhesive, lay the sticker down and squeegee the moisture out from underneath slowly and evenly. If you apply it dry, fix it in place at the top first and work evenly downwards: repositioning it afterwards is difficult.
Bekijk ook deze producten die mogelijk interessant voor u zijn.
