Vergelijkbare producten
Bekijk ook deze producten die mogelijk interessant voor u zijn.
An outdoor LED frame is a lightbox with a stretched fabric in it: large, taut and clearly visible in the evening too. Think of a facade, a showroom or the wall alongside your car park. You can order it up to 300 x 1000 cm. Configure your frame below; collect it from us in Nijmegen or have it delivered, either is possible.
The fabric is Backlit fabric of 450 g/m², water-repellent and with fire class B1. We UV-print a double layer of ink on it, 200% full colour, so the colours stay strong when light shines through. With the lighting off, the colours are therefore slightly darker. The ink is scratch-resistant; straight after printing the print smells a little, but this fades on its own.
The frame is waterproof and has small holes at the bottom so water can drain away. On the Dibond® back panel are LED strips that light the fabric evenly from behind. The fabric is finished with a flat keder, which you press into one of the two grooves in the frame. The frame arrives fully assembled.
You order a complete set, just a frame, or just a new fabric for a frame you already have. The frame is silver as standard. If you want a different colour, give us the RAL code; the profile is then powder-coated in that colour.
Illuminated presentation system — your print lights up evenly.
Up to 300 x 1000 cm. If you need something larger, send us a message via WhatsApp.
Yes. It is silver as standard, but with a RAL code we can powder-coat the profile in your colour. Ask us before you order.
With UV print: the ink is cured instantly with UV light and is scratch-resistant afterwards. The print may smell a little at first; that disappears after a while.
An outdoor LED frame is a lightbox with a stretched fabric in it: large, taut and clearly visible in the evening too. Think of a facade, a showroom or the wall alongside your car park. You can order it up to 300 x 1000 cm. Configure your frame below; collect it from us in Nijmegen or have it delivered, either is possible.
The fabric is Backlit fabric of 450 g/m², water-repellent and with fire class B1. We UV-print a double layer of ink on it, 200% full colour, so the colours stay strong when light shines through. With the lighting off, the colours are therefore slightly darker. The ink is scratch-resistant; straight after printing the print smells a little, but this fades on its own.
The frame is waterproof and has small holes at the bottom so water can drain away. On the Dibond® back panel are LED strips that light the fabric evenly from behind. The fabric is finished with a flat keder, which you press into one of the two grooves in the frame. The frame arrives fully assembled.
You order a complete set, just a frame, or just a new fabric for a frame you already have. The frame is silver as standard. If you want a different colour, give us the RAL code; the profile is then powder-coated in that colour.
Bekijk ook deze producten die mogelijk interessant voor u zijn.
